Alarm

AJAX LeaksProtect WHITE  - Wireless Leak Sensor AJ-LeaksProtectLeaksProtectWireless flood detector detects first signs of leakage within milliseconds. It is installed without using tools.Authentication to prevent forgeryJamming detection and communication channels encryptionTwo-way communicationRaises the alarm as soon as water gets on one of the four pairs of contactsRegisters when the area dries out and cancels the alarmThe detector mounts by placing on the floor in areas of possible water inflowPrinciple of operationThe device detects first signs of flooding as soon as water gets on one of the four pairs of contacts on the bottom of the detector.FeaturesThe device has IP65 enclosure protection, meaning it is completely protected against dust and moisture.Installation and set upIt can be installed in just one minute. The detector only has to be placed on the floor under a washing machine, dishwasher, bathtub or heating radiator.ClassificationRadio channel smoke detector with temperature sensor and built-in sirenType of detectorWirelessInstallation methodIndoorsCompatibilityOperates with all Ajax hubs, range extenders, ocBridge Plus, uartBridgeSensing elementPhotoelectric, CO and temperature sensorsActivation threshold+59°С ±2°СType of notificationSound/lightVolume of built-in siren85 dBAlarm signal delivery time0.15 sFalse alarm filter+Interconnected alarms+Power supply Battery: Two CR2 batteries, 3 VBackup battery: CR2032Battery lifeUp to 4 yearsJeweller radio technology Communication range with central unit — up to 1,300 m in an open spaceTwo-way communication between devicesOperating frequencies — 868.0-868.6 MHzSelf-adjusting RF output power — up to 20 mWBlock encryption based on AES algorithmDetector polling period — 12−300 sAdditional temperature sensorAvailableOperating temperature rangeFrom 0°С to +65°СPermissible humidityUp to 80%Anti-sabotage Protection against fraudJamming detectionTamper-resistant

AJAX MotionCam White - Motion Detector with a Photo Camera to Verify AlarmsMotion detector with a photo camera to verify alarmsTransmits a photograph in under 9 secSees in the darkOperates on a distance of up to 1700 m from the hubPhoto capture only when alarmedAll pictures are encryptedIgnores pets weighing up to 20 kg and growing up to 50 cmMotionCam detectors require Hub 2 or Hub 2 Plus for operationOperates up to 4 years on the pre-installed batteriesReveals what’s happeningWith the MotionCam, you see what triggered an alarm. The detector spots people’s motion within a 12-meter range and takes a series of photos.In contrast with the video surveillance systems, MotionCam wireless detectors take minutes to install, are independent of Wi-Fi, and continue to operate smoothly even during a blackout.ClassificationElectro-optical combined radio channel security detector with a photo cameraDetector typeWirelessInstallationIndoorsMotion detection distanceUp to 12 mPet immunity   Weight: up to 20 kgHeight: up to 50 cmCompatibilityOnly with Hub 2 or Hub 2 PlusSensing elementPIR sensorDetection angles   Horizontal — 88.5°Vertical — 80°Camera view angle90°Alarm signal delivery time0.15 secPhoto verification  Time to deliver a photograph with default settings: up to 9 secPhoto quality: up to 640 × 480 pxPictures in a series: 1-5 pcsIR backlight fornight mode picturesAvailableSensitivityAdjustable, 3 levelsRecommendedinstallation height2.4 mPower supplyBatteries: CR123A (x2), 3 VJeweller radio technology    Communication range with detectors: up to 1,700 m in the line of sightTwo-way communication between devicesOperating frequencies: 868.0 - 868.6 MHzSelf-adjusting RF output power: up to 20 mWBlock encryption based on AES algorithmDetector polling period: 12−300 sFrequency hoppingWings radio technologyTransmission of visual alarm verificationsTemperature sensorAvailableOperatingtemperature rangeFrom -10°C to +40°COperating humidityUp to 75%